10.4.4 Replacing the compressor oil filter
Material Spare part
Tool
Receptacle
Cleaning cloth
Precondition The machine is switched off.
The machine has been set down on level ground,
the machine is at operating temperature.
Air consumers are disconnected,
the outlet valves are open,
the machine is fully vented, the pressure gauge reads 0 bar.
Enclosure is open,
negative cable to battery has been disconnected.
CAUTION
Danger of burning from hot components and oil.
➤ Wear long-sleeved clothing and gloves.
Fig. 47 Change the oil filter
1
Oil filter
2
Direction of arrow (loosen oil filter)
3
Thermostatic valve (integrated in airend)
Changing the oil filter:
1. Prepare a receptacle.
2. Loosen oil filter (turn in direction of arrow
2
).
3. Remove the oil filter.
4. Catch any escaping cooling oil.
5. Carefully clean sealing surface (flange) using lint-free cloth.
6. Lightly oil the new filter's gasket.
7. Set oil filter into installation position.
10 Maintenance
10.4 Compressor Maintenance
No.: 9_9548 22 HCE
Operating Manual Portable Rotary Screw Compressor
MOBILAIR M27 PE
129
