HPC 49X8SSEI-L, Installation & Operation Instructions

Page: 11 / 23

11
4/28/2017 860-EI
Hearth Products Controls Co.
EI App Instructions
App Setup and Usage
Note:
x
The content of the app or the design is
subject to change. Support for apps
may be discontinued without notice,
depending on the content provider’s
policy.
x
Adult use only.
Attention:
x
When pairing a device with the fire pit,
only one Bluetooth connection can be
used. Turn Bluetooth “OFF” to allow
other devices to connect to the fire pit.
Setting up the App:
1. Download the HPC
Fire App from the
Apple store or Google
Play.
2.
If power is already applied, disconnect
power for 20 seconds and reconnect
power.
3. Open the HPC Fire App, see Fig.1.
4. From the setup screen, enter 6
characters.
5. Enter a password and confirm the
password.
6. Select your language, and press
“Continue”.
7. Enable the Bluetooth.
8. Select search for devices, see Fig.2.
9. Select the Remote Igniter.
10. Enter the default security code 2345 and
press “Connect”, see Fig.3. Repeat until
App is connected to the fire pit.
Note: If App will not pair with the fire pit,
disconnect power for 20 seconds, and then
repeat the install steps above.
Fig.1
Fig.2
Fig.3