Hinges
Description
Spare part number
Hinges (2, available in the Kickstand Hinge Kit, includes left and right hinges)
L13279-001
Before removing the hinges, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
Display panel assembly on page 30
), and then remove the
following components:
a.
Front-facing webcam/microphone module (see
Front-facing webcam/microphone module
)
b.
Battery (see
c.
System board (see
)
Remove the hinges:
1.
Remove the four Phillips M2.0×4.7 screws (1) that secure the hinges to the back cover.
2.
Remove the hinges (2).
Reverse this procedure to install the hinges.
58
Chapter 5 Removal and replacement procedures
Summary of Contents for ZBook x2
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...