manualshive.com logo in svg

HP ZBook Studio G4, Maintenance And Service Manual

The HP ZBook Studio G4 Maintenance and Service Manual is a comprehensive guide for troubleshooting and maintaining your powerful workstation. This essential manual can be easily downloaded for free from our website, ensuring you have all the information you need to keep your device running smoothly.

Share
Download
background image

b.

Using a flat tool, pry the board loose (2), and then remove the board (3) from the display 
enclosure. (The thermal board is attached to the display enclosure with double-sided adhesive.)

c.

Remove the thermal board.

The thermal board is available using spare part number 840956-001.

9.

If it is necessary to replace the display hinges:

a.

Remove the three Torx T8M2.5×4.0 screws (1) that secure each display hinge to the display panel.

b.

Rotate each hinge (2) to disengage the hinge from the tabs (3).

58

Chapter 5   Removal and replacement procedures for authorized service provider parts

Summary of Contents for ZBook Studio G4























































































































































































Reviews:

No comments

Related manuals for ZBook Studio G4

Brands by name

Popular brands

Load more brands