CAUTION:
Before turning the display panel upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
b.
Lift the top edge of the display panel (1) and swing it up and forward until it rests upside down in
front of the display enclosure.
c.
Remove the display cable from the clip (2).
d.
Lift the tape (3), and then disconnect the display panel cable (4) from the display panel.
e.
Remove the display panel.
The display panel is available using the following spare part numbers:
FHD panel with a display cable: 936514-001
UHD panel with a display cable: 936515-001
FHD panel without a display cable: 819355-006
UHD panel without a display cable: 819356-006
7.
If it is necessary to replace the camera module or microphone module:
NOTE:
The camera module and microphone module are similar in appearance and installed in the
same location. The removal procedures are the same for both modules.
CAUTION:
Handle the module with caution. This module has a thin profile and is susceptible to damage
when not handled carefully.
a.
Detach the camera or microphone module (1) from the display enclosure. (The module is attached
to the display enclosure with double-sided adhesive.)
56
Chapter 5 Removal and replacement procedures for authorized service provider parts
