manualshive.com logo in svg

HP ZBook Fury 17 G7, Maintenance And Service Manual, Page: 25 / 232

Share
Download
HP ZBook Fury 17 G7 Maintenance And Service Manual Download Page 25

Touchpad settings

Adjusting touchpad settings

Follow these steps to adjust the touchpad settings and gestures.

Use these steps to adjust touchpad settings and gestures.

1.

Type touchpad settings in the taskbar search box, and then press enter.

2.

Choose a setting.

Turning on the touchpad

Follow these steps to turn on the touchpad.

Follow these steps to turn on the touchpad.

1.

Type 

touchpad settings

 in the taskbar search box, click the Touchpad button.

2.

Using an external mouse, click the Touchpad button.

If you are not using an external mouse, press the Tab key repeatedly until the pointer rests on the 
touchpad button. Then press the spacebar to select the button.

Touchpad components

Use the illustration and table to identify the touchpad components.

Table 2-4

  Touchpad components and their descriptions

Component

Description

(1)

Pointing stick

Moves the pointer on the screen.

(2)

Center pointing stick button

Functions like the center button on an external mouse.

(3)

Left pointing stick button

Functions like the left button on an external mouse.

ENWW

Keyboard area

11

Summary of Contents for ZBook Fury 17 G7









































































































































































































































Reviews:

No comments