manualshive.com logo in svg

HP ZBook Fury 17 G7, Maintenance And Service Manual, Page: 206 / 232

Share
Download
HP ZBook Fury 17 G7 Maintenance And Service Manual Download Page 206

Changing the computer boot order

If your computer does not restart using the HP Recovery media, you can change the computer boot order, the 
order of devices listed in BIOS for startup information. You can select an optical drive or a USB flash drive, 
depending on the location of your HP Recovery media.

IMPORTANT:

For a tablet with a detachable keyboard, connect the tablet to the keyboard base before 

beginning these steps.

To change the boot order:

1.

Insert the HP Recovery media.

2.

Access the system Startup menu.

●

For computers or tablets with keyboards attached, turn on or restart the computer or tablet, quickly 
press 

esc

, and then press 

f9

 for boot options.

●

For tablets without keyboards, turn on or restart the tablet, quickly press and hold the volume up 
button, and then select f9.

‒

 or –

Turn on or restart the tablet, quickly press and hold the volume down button, and then select f9.

3.

Select the optical drive or USB flash drive from which you want to boot, and then follow the on-screen 
instructions.

Using HP Sure Recover (select products only)

Select computer models are configured with HP Sure Recover, a PC OS recovery solution built into the hardware 
and software. HP Sure Recover can fully restore the HP OS image without installed recovery software.

Using HP Sure Recover, an administrator or user can restore the system and install:

●

Latest version of the operating system

●

Platform-specific device drivers

●

Software applications, in the case of a custom image

To access the latest documentation for HP Sure Recover, go to 

http://www.hp.com/support

. Follow the on-

screen instructions to find your product and locate your documentation.

192 Chapter 9   Backing up, restoring, and recovering

ENWW

Summary of Contents for ZBook Fury 17 G7









































































































































































































































Reviews:

No comments