HP XP7 User Manual Download

Page: 266 / 442

Description

Item

Storage system identifier in hexadecimal format.

SSID

Cache logical partition number, displayed as

CLPR

CLPR

For detailed information about CLPRs, see the HP XP7 Cache Partition User
Guide.

MP blade identifier. If

Auto

is selected, the ID is automatically assigned.

MP Blade ID

Indicates whether Smart Tiers or Smart Tiers Z is enabled or disabled.

Smart Pool

Enabled: The LDEV is for Smart Tiers or Smart Tiers Z.

Disabled: The LDEV is not for Smart Tiers or Smart Tiers Z.

The tiering policy name and ID for the LDEV.

Tiering Policy

Displays the new page assignment tier for the LDEV.

New Page Assignment Tier

Displays the relocation priority assigned to the LDEV.

Relocation Priority

Displays the attribute of the LDEV.

Attribute

TSE: TSE-VOL

Hyphen (-): Volume in which the attribute is not defined.

Encryption information.

Encryption

Enable: encrypted parity group

Disable: non-encrypted parity group

If the parity group in which the encryption setting is not defined, a hyphen
(-) is displayed.

Resource group name and ID of which this LDEV is a member.

Resource Group Name (ID)

Displays the information about the virtual storage machine.

Virtual Storage Machine

•

Model / Serial Number: The model name and serial number of the
virtual storage machine having the LDEV.

•

Attribute: Virtual LDEV attribute. If the attribute is not set for LDEV, this
column is blank.

Opens the Edit SSIDs window.

Edit SSIDs

Opens the Change LDEV Settings window.

Change LDEV Settings

Removes the added LDEV.

Remove

Create LDEVs Confirm window

NOTE:

If multiple tasks that are connected in one wizard are executed, this window shows all

configured items of tasks. To show information of configured items other than this topic, click

Back

to display related setting windows, then click

Help

266 LDEV GUI reference

Summary of Contents for XP7



























































































































































































































































































































































































































































Search results

Summary of Contents for XP7

Reviews:

Related manuals for XP7

Brands by name

Popular brands

HP XP7, User Manual

Search results

Summary of Contents for XP7

Reviews:

Related manuals for XP7

Brands by name

Popular brands