HP XP7 User Manual Download

Page: 258 / 442

Description

Item

Open the

View Migration Plans

window. For details, see the HP XP7 Auto LUN

User Guide.

View Migration Plans*

Open the

View Histories

window. For details, see the HP XP7 Auto LUN User

Guide.

View Histories*

*Available when you select

Auto LUN

LDEVs tab

Description

Item

LDEV identifier, which is the combination of LDKC, CU, and LDEV.

LDEV ID

LDEV name.

LDEV Name

LDEV status.

Status

Normal: Normal status.

Blocked: Host cannot access a blocked volume.

Warning: Problem occurs in the volume.

Formatting: Volume is being formatted.

Preparing Quick Format: Volume is being prepared for quick formatting.

Quick Formatting: Volume is being quick-formatted.

Correction Access: Access attribute is being corrected.

Copying: Data in the volume is being copied.

Read Only: Data cannot be written on a read-only volume.

Shredding: Volume is being shredded.

Hyphen (-): Any status other than the above.

Displays the V-VOL management task being performed on a Thin Provisioning, Thin
Provisioning Z, Smart Tiers, or a Smart Tiers Z V-VOL.

V-VOL Management
Task

•

Reclaiming Zero Pages: The process is in progress.

•

Waiting for Zero Page Reclaiming: The process has been waited.

•

Blank: The V-VOL management task can be performed on the volume, but the task is not
currently in process.

•

Hyphen(-): The V-VOL management task cannot be performed on the volume.

LDEV capacity.

Capacity

Number of paths set for the LDEV.

Number of paths

Emulation type.

Emulation Type

Provisioning type to be assigned to the LDEV.

Provisioning Type

Basic: Internal volume.

THP: THP V-VOLs.

External: External volume.

External MF: Migration volume.

Snapshot: Fast Snap volume.

Attribute of the volume indicating how the LDEV is being used.

Attribute

258 LDEV GUI reference

Summary of Contents for XP7



























































































































































































































































































































































































































































Search results

Summary of Contents for XP7

Reviews:

Related manuals for XP7

Brands by name

Popular brands

HP XP7, User Manual

Search results

Summary of Contents for XP7

Reviews:

Related manuals for XP7

Brands by name

Popular brands