HP XP7 User Manual Download

Page: 203 / 442

Adding a selected host to a host group

The Storage Administrator (Provisioning) role is required to perform this task.

To add a host to a host group:
1.

Click

Ports/Host Groups

in the

Storage Systems

tree.

The list of available ports appear in the tree.

Select the

Hosts

tab, or select a port from the tree then select the

Hosts

tab.

Select a host which you want to add.

Select

Add to Host groups

Select the desired host groups from the

Available Host Groups

table, then click

Add

Selected host groups are listed in the

Selected Host Groups

table.

If you select a row and click

Detail

, the

Host Group Properties

window appears.

Click

Finish

The

Confirm

window appears.

In the

Add to Host groups

window, confirm the settings, in

Task Name

type a unique name

for this task or accept the default, then click

Apply

Go to tasks window for status

is checked, the

Tasks

window opens.

Click

to close the message.

Adding a host to the selected host group

The Storage Administrator (Provisioning) role is required to perform this task.

To add a host to the selected host group:
1.

Click

Ports/Host Groups

in the

Storage Systems

tree.

Select the

Host Groups

tab.

Select the host group to which the host is added.

Select

Add to Hosts

Select the desired host from the

Available Hosts

table, then click

Add

Selected host groups are listed in the

Selected Hosts

table.

If the desired host has never been connected with a cable to any port in the storage system,
perform the following steps:
1.

Click

Add New Host

under the

Available Hosts

list.

The

Add New Host

dialog box opens.

Enter the desired WWN in the

HBA WWN

box.

If necessary, enter a nickname for the host bus adapter in the

Host Name

box.

Click

to close the

Add New Host

dialog box.

Select the desired host bus adapter from the

Available Hosts

list.

Click

Finish

The

Confirm

window appears.

In the

Add to Host groups

window, confirm the settings, in

Task Name

type a unique name

for this task or accept the default, then click

Apply

Go to tasks window for status

is checked, the

Tasks

window opens.

Click

to close the message.

Managing hosts 203

Summary of Contents for XP7



























































































































































































































































































































































































































































Search results

Summary of Contents for XP7

Reviews:

Related manuals for XP7

Brands by name

Popular brands

HP XP7, User Manual

Search results

Summary of Contents for XP7

Reviews:

Related manuals for XP7

Brands by name

Popular brands