Docking board (models without a hard drive)
Description
Spare part number
Docking board (models without a hard drive)
902371-001
Before disassembling the dock, follow this step:
▲
Remove the bottom cover (see
).
Remove the docking board:
1.
Disconnect the keyboard cable from the docking board (1).
2.
Disconnect the touchpad cable from the docking board (2).
3.
Remove the two Phillips PM2.0×2.0 screws (3) that secure the board to the doc.
4.
Remove the docking board from the dock (4).
Reverse this procedure to install the docking board.
Dock component replacement procedures
45
Summary of Contents for X2 210 G2
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
