
Programming the HP E1415 for PID Control
89
FIFO Status Commands
[SENSe:]DATA:FIFO:COUNt? returns a count of the values in the FIFO
buffer. Use with the DATA:FIFO:PART? or DATA:FIFO:ALL? commands
[SENSe:]DATA:FIFO:COUNt:HALF? returns a 1 if the FIFO is at least
half full (32,768 values) or a 0 if not. Use with the DATA:FIFO:HALF?
command.
All of the FIFO commands except SENS:DATA:FIFO:ALL? can execute
while the module continues to run algorithms. Once a FIFO Transfer
command is executed, the instrument can not accept other commands until
the transfer is complete as specified for each command above. The FIFO
Status commands allow you to poll the instrument for availability of values
before executing a transfer command.
Which FIFO Mode?
The way you will read the FIFO depends on how the FIFO mode was set in
the programming step 7 of the “Programming Sequence” on page 60.
Continuously Reading the FIFO (FIFO mode BLOCK)
If you are going to read the FIFO while algorithms are running you must set
the FIFO mode to SENS:DATA:FIFO:MODE
BLOCK. In this mode if
the FIFO fills up, it stops accepting values from algorithms. The algorithms
continue to execute, but the latest data is lost. To avoid losing any FIFO data,
your application needs to read the FIFO often enough to keep it from
overflowing. Here’s a flow diagram to show you where and when to use the
FIFO commands.
Begin Data Retrieval
Exit Data Retrieval
Algorithm Stopped?
Any Values in FIFO?
Enough Values
in FIFO?
Execute Final Transfer
Command
Execute Bulk Transfer
Command
DATA:FIFO:COUNT?
DATA:FIFO:PART? <n_values>
no
no
no
yes
yes
yes
STAT:OPER:COND?
(bit 4 "measuring")
Figure 3-9. Controlling Reading Count
Summary of Contents for VXI 75000 C Series
