HP VMA Series, Installation And Service Manual

Page: 281 / 300

In-memory Context Commands
HP-AM456-9002A Rev 01 VMA-series Memory Array Installation and Service Guide
281
In-memory Context Commands
Figure D.20 System>Logging>In-Memory Context Level
The table below describes the commands available at the In-memory context
sublevel of the CLI. Access the In-memory context sublevel through the Logging
context level. See
Logging Context Commands on page 279.
context category
Moves into the Category context level to access the message category related
commands.
Syntax
context category <category_name>
Where:
Table D.22 In-memory Context Commands
Command Description
context category
Moves into the Category context level. See
Category Context Commands on page 285.
set default-level
Sets the default logging level for all message
categories.
show default-level
Displays the default logging level for all message
categories.
category_name
The Category context level. See Table D.23
below for the list of valid message categories.