f.
Select
Force to be a primary partition
.
g.
Click
OK
.
6.
Click
New
.
a.
Change the "File System Type" to
swap
.
b.
Make sure that only your boot device is selected under "Allowable Drives.”
c.
Set "Size (MB)" to the following formula: size = (
RAM in system
) x 2.
d.
Make sure "Additional Size Options" is set to
Fixed Size
.
e.
Select
Force to be a primary partition
.
f.
Click
OK
.
7.
Click
New
.
a.
For "Mount Point,” enter
/
.
b.
Make sure "File System Type:" is set to
ext3
.
c.
Make sure that only your boot device is selected under "Allowable Drives"
d.
Set "Additional Size Options" to
Fill to maximum allowable size
.
e.
Select
Force to be a primary partition
.
f.
Click
OK
.
g.
Click
Next
.
1.4 Boot Loader Configuration
1.
Click the checkbox for "Configure advanced boot loader options.”
2.
Click
Next
.
3.
Click
Change Drive Order
.
4.
Highlight the drive you are booting to with the mouse and click on the up arrow
to move it up to the top of the list. You may need to select the drive and click on
the up arrow several times until it is on the top of the list.
5.
Click
OK
.
6.
You may need to enter special kernel parameters here. (See section 2.1.2.)
74
HP CONFIDENTIAL
Writer: Jimmy Chan File Name: 312977-006.doc
Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM