c.
The installation program displays the drivers detected: a SCSI driver and a
generic ATA/IDE/ATAPI Adapter driver (
IDEATA.HAM
). Press
Delete
to
remove the default SCSI driver. The only remaining driver should be the
IDEATA.HAM
driver.
NOTE:
Do NOT remove the IDEATA driver because it is used by the CD-ROM Drive.
d.
Insert HP disk NW SCSI (created with the Startup CD) in the floppy drive.
e.
Press
Insert
to add a driver and then
Insert
again to add an unlisted driver.
f.
Press
F3
and specify the path:
A:
then press
Enter
.
g.
The installation program takes a few seconds then automatically adds the HP
driver on the driver list.
NOTE:
The new HP driver may show the same device name description but is a more
recent version.
h.
Scroll down and select "
Return to driver summary.
"
i.
Scroll down and select
Continue
.
3.
The next driver summary screen displays storage and network devices.
4.
Scroll down to chose
Modify
and press
Enter
.
a.
Scroll down to highlight the "Network Boards" item and press
Enter
.
b.
The installation program displays the drivers detected. Delete the drivers
you wish to replace by selecting them and pressing the
delete
key.
c.
Insert the HP LAN driver disk (created with the Startup CD) in the floppy
drive.
d.
Press
Insert
to add a driver and then
Insert
again to add an unlisted driver.
e.
Press
F3
and specify the path:
A:
then press
Enter
.
f.
The installation program takes a few seconds then automatically adds the HP
driver on the driver list.
g.
Scroll down and select "Return to driver summary."
h.
Scroll down and select Continue.
63
HP CONFIDENTIAL
Writer: Jimmy Chan File Name: 312977-006.doc
Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM