3.
At the system console prompt enter the command:
load
cdrom
4.
Wait for about 15 seconds for the CD to be automatically mounted as a volume.
After it is completely mounted the system should say
"Volume name"
mounted successfully
.
5.
Enter the command:
nwconfig
The NetWare Configuration Tool will open.
6.
Scroll down to select "
Product Options
.”
7.
Scroll up to select "Install a Product Not Listed."
8.
Press
F3
and specify the path, including the volume name (for example,
NW6SPx:
where the x = version of support pack).
9.
Press
Esc
to continue.
10.
Press
Yes
to accept the Terms and Conditions.
11.
Press
Esc
to continue.
12.
Press
Yes
to accept the ConsoleOne Reporting Tool agreement.
13.
Press
Enter
to continue.
NOTE:
If you want to be able to uninstall the Support Pack later, you must select the
option to back up files.
14.
HP recommends selecting the option to update the Storage/LAN/PSM/WAN
drivers currently in use..
IMPORTANT:
Always select
No
when asked to reboot the server after copying files. If
you select
Yes
, the server may not come up.
15.
Read the warning displayed by the service pack and then press
Enter
to continue.
16.
After the support pack installation is complete, choose
NCF files Options
and
press
Enter
.
56
HP CONFIDENTIAL
Writer: Jimmy Chan File Name: 312977-006.doc
Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM