manualshive.com logo in svg

HP Tc2120 - Server - 256 MB RAM, Installation Manual, Page: 5 / 92

Share
Download
HP Tc2120 - Server - 256 MB RAM Installation Manual Download Page 5

 

Section 1. Run HP DiagTools (Optional)......................................................................... 50

 

Section 2. Create the Drivers Diskettes ............................................................................ 51

 

Section 3. Perform NetWare 6.0 Installation.................................................................... 51

 

Phase 1 – Start the Installation....................................................................................51

 

Phase 2 – Install HP Drivers .......................................................................................52

 

Phase 3 – Configure the Network ...............................................................................54

 

Section 4. Install the Support Pack................................................................................... 55

 

Section 5. Install Additional HP Accessories................................................................... 57

 

Troubleshooting................................................................................................................ 58

 

Tip #1. Restarting NetWare Installation .....................................................................58

 

On-Line Information and Software Sources..................................................................... 58

 

Installing Novell NetWare 6.0 SBS ............................................................. 58

 

Prepare the Installation ..................................................................................................... 58

 

High Level Process Flow ................................................................................................. 58

 

Section 1. Create the Drivers Diskettes ............................................................................ 59

 

Section 2. Perform Netware 6.0 SBS Installation ............................................................ 59

 

PHASE 1 – Pre-Installation ........................................................................................60

 

PHASE 2 – Start the Installation ................................................................................62

 

PHASE 3 – Install HP Drivers....................................................................................62

 

PHASE 4 – Configure the Network............................................................................64

 

Section 3. Install Additional HP Accessories................................................................... 66

 

Troubleshooting................................................................................................................ 66

 

Tip #1. Restarting NetWare Installation .....................................................................66

 

On-Line Information and Software Sources..................................................................... 66

 

Installing Red Hat Linux 9.0 ....................................................................... 67

 

Prepare the Installation ..................................................................................................... 67

 

High Level Process Flow ................................................................................................. 67

 

Section 1. Perform Red Hat Linux Installation ................................................................ 67

 

Phase 1 — Launch the Installation .............................................................................67

 

Phase 2 — Configure the Server.................................................................................68

 

Phase 3 — Complete the Installation..........................................................................70

 

Section 2. Install Additional HP Accessories................................................................... 71

 

On-Line Information and Software Sources..................................................................... 71

 

Installing Red Hat Linux 8.0 ....................................................................... 72

 

Prepare the Installation ..................................................................................................... 72

 

High Level Process Flow ................................................................................................. 72

 

Section 1. Perform Red Hat Linux Installation ................................................................ 72

 

 

5 

  

HP CONFIDENTIAL

 

Writer: Jimmy Chan File Name: 312977-006.doc 

Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM 

Summary of Contents for Tc2120 - Server - 256 MB RAM





























































































Reviews:

No comments