Phase 2 – Install HP Drivers
1.
The installation program then detects your hardware and attempts to match the
drivers to the hardware. It displays a
Driver names
summary screen.
2.
Do one of the following:
— If you have an IDE system, press
Enter
to continue and then proceed with
to step 4.
— If you have a SCSI model, you need to install the HP SCSI driver (the SCSI
driver proposed by default by NetWare does not install properly). Proceed
with step 3.
3.
To install the HP SCSI driver:
a.
Scroll down, select
Modify
, and press
Enter
.
b.
Scroll down, highlight the
Storage Adapters
item, and press
Enter
.
The installation program displays the drivers detected: a SCSI driver and a
generic ATA/IDE/ATAPI Adapter driver (
IDEATA.HAM
).
c.
Press
Delete
to remove the default SCSI driver. The only remaining driver
should be the
IDEATA.HAM
driver.
NOTE:
Do not remove the IDEATA driver. It is used by the CD-ROM drive.
d.
Insert HP disk NW SCSI (created with the Startup CD) in the floppy drive.
e.
Press
Insert
to add a driver, and then press
Insert
again to add an unlisted
driver.
f.
Press
F3
and specify the path:
A:
then press
Enter
.
g.
The installation program will scan the floppy drive for compatible drivers
and then automatically add the HP SCSI driver to the driver list.
NOTE:
The new HP driver may show the same device name description, however, it is
an updated version.
h.
Scroll down and select
Return to driver summary
.
i.
Scroll down and select
Continue
.
46
HP CONFIDENTIAL
Writer: Jimmy Chan File Name: 312977-006.doc
Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM