3.
From the drive A: prompt, format and transfer DOS system files to the hard disk
DOS boot partition by entering one of the following commands:
— When using the NetWare DOS utility, enter:
A:\>FORMAT C: /X /S
— When using the MSDOS utility, enter:
A:\>FORMAT C: /S
4.
Create the appropriate directories and copy the necessary drivers and files to the
DOS boot partition by issuing the following commands at the DOS prompt:
C:
MD \NWUPDATE
CD \NWUPDATE
5.
Insert the HP disk
NW patch
(created with the Startup-CD) and enter:
COPY A:\*.*
6.
Remove the diskette and insert the NW 5.1 CDROM in the drive, then reboot the
server.
7.
After bootup, when Netware brings you to the initial setup screen, press
Alt
+
F10
to exit to the command line.
8.
At the command line, enter the following lines:
DOWN
Z:
INSTALL –lic –bootcd
9.
Select the Appropriate Language, if prompted.
10.
Press
F10
to Accept the License Agreement.
11.
Press
Enter
to setup
a new server
, then scroll down to be sure that
Continue
is
highlighted.
12.
Press
Enter
to continue.
13.
Modify or accept the server settings, the regional settings, and the mouse and
video configuration.
45
HP CONFIDENTIAL
Writer: Jimmy Chan File Name: 312977-006.doc
Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM