2.
Select the appropriate client type for your environment.
3.
Click
Format disk
if needed. Check the number of disks required and label them
as "Terminal Services for [..] Disk [x/y].” Click
OK
to proceed.
4.
Follow on-screen instructions to perform the diskettes copies.
5.
Click
OK
at the screen that reads, "[y] floppies were created…..”
6.
Click
Cancel
to end the "Create Installation disks" utility.
Install the Client Utility on a Client Workstation
1.
Insert diskette 1 in the target client and run
A:\setup.exe
2.
Click
Continue
at the setup screen.
3.
Complete the "Name and Organization Information" form. You will be prompted
for this information only the first time the diskettes are used. Click
OK
to
validate then
OK
again to confirm.
4.
Click
I Agree
to accept the license agreement.
5.
Click the
Large Icon
to start installation.
6.
Select the installation mode you feel appropriate: all users (
Yes
) or current user
only (
No
).
7.
Insert following diskette(s) when prompted and follow screen instructions.
8.
Click
OK
when the installation is completed then shutdown and restart
workstation.
Section 5. Configure the Network
Phase 1 – Configure Server IP Address
During the installation process the system was configured to use DHCP. If no DHCP
server is found on the network the system will auto-configure a random IP address to
start functioning. It is important that you configure the proper IP address to be able to
communicate with the clients:
17
HP CONFIDENTIAL
Writer: Jimmy Chan File Name: 312977-006.doc
Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM