manualshive.com logo in svg

HP TBD, Maintenance And Service Manual, Page: 60 / 79

Share
Download
HP TBD Maintenance And Service Manual Download Page 60

h.

Disconnect the display panel cable (5) from the display panel.

i.

Remove the display panel.

The display panel is available using the following spare part numbers:
N01953-001: LCD, FHD (1920 × 1080), WLED, antiglare, UWVA, 45 % CG, eDP, slim touchscreen display 

panel with narrow bezel and camera privacy cover; typical brightness: 250 nits
N01952-001: LCD, FHD (1920 × 1080), WLED, antiglare, UWVA, 45 % CG, eDP, slim non-touchscreen 

display panel with narrow bezel and camera privacy cover; typical brightness: 250 nits
N01955-001: LCD, HD (1366 × 768), LED, antiglare, SVA, 45 % CG, eDP 1.2 without PSR, flat 

touchscreen display panel with narrow bezel and camera privacy cover; typical brightness: 250 nits
N01954-001: LCD, HD (1366 × 768), LED, antiglare, SVA, 45 % CG, eDP 1.2 without PSR, flat non­

touchscreen display panel with narrow bezel and camera privacy cover; typical brightness: 250 nits

19.

If you need to remove the webcam/microphone module and cable:

a.

Remove the display bezel.

b.

Remove the display hinges.

c.

Remove the display panel.

d.

Remove the two Philllips M2.0 × 3.4 screws (1) that secure the display bracket to the display back 

cover.

e.

Remove the display bracket (2).

The display bracket is included in the Bracket Kit, spare part number N01962-001.

Display assembly

53

Summary of Contents for TBD
















































































Reviews:

No comments