For more information about exporting registry settings, see Chapter 6,
Registry Import/Export
on page 84
.
System Update
The System Update dialog box allows you to define the means by which you update the terminal image.
The feature updates only the operating system, the BIOS is not updated. You can update the image:
This tab allows you to automatically update the image by having the DHCP server provide the location
of the file server on which the upgrade files are located. This feature provides an alternative to Altiris for
image deployment.
●
Directly from HP by manually entering HP FTP file server information for the server that contains
the update.
●
By allowing the DHCP server to locate the FTP file server that contains the update.
NOTE:
For more information on setting DHCP values, refer to the “DHCP Options” section in this
chapter.
You may want to update your image because of the following:
●
You receive a new client, perform updates to the client image, and decide you want to revert to the
“good, known” image.
●
An image gets corrupted and the client requires re-imaging.
●
Your client image is old and you want the newest available stable image.
CAUTION:
Turning off the power before the update is complete may corrupt the flash memory on the
terminal.
ENWW
System Update
67
