HP ThinState Deploy
To perform an HP ThinState deployment:
1.
Set the boot order in the F10 System BIOS to
USB boot
.
2.
Attach the USB flash drive to the thin client unit you wish to deploy the captured image to, and
then power on the unit.
3.
Follow the on-screen instructions.
After you remove the USB flash drive and cycle power to the system, the image will unbundle. This
process can take 3–5 minutes, depending on flash drive speed and internal flash size. Do not
interrupt or cycle power to the unit during this process.
Microsoft Internet Explorer
Version 7.0 of the Microsoft Internet Explorer browser is installed locally on the thin client. The
Internet options settings for the browser have been preselected at the factory to limit writing to the
flash memory. These settings prevent exhaustion of the limited amount of flash memory available and
should not be modified. You may access another browser through an ICA or RDP account if you need
more browser resources.
Internet Explorer has more control over the execution of all content, including a built-in facility to
manage pop-up windows. Furthermore, Internet Explorer now prevents scripts from moving or
resizing windows and status bars to hide them from view or obscure other windows.
A block unsafe file transfers feature is available with Internet Explorer 7. For a list of files generally
considered unsafe, see
Information About the Unsafe File List in Internet Explorer 6
on the Microsoft
Web site at
http://support.microsoft.com/kb/291369
.
30
Chapter 4 Applications
ENWW
Summary of Contents for t5400 - Thin Client
Page 4: ...iv About This Book ENWW ...
Page 8: ...viii ENWW ...
Page 47: ...ENWW Write Filters 39 ...
