Power connector cable
Description
Spare part number
Power connector cable
810327-004
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable from the system board (see
).
6.
Remove the display assembly (see
).
Remove the power connector cable:
1.
Disconnect the power connector cable (1) from the system board.
2.
Release the power connector (2) from the retention clips built into the bottom cover.
3.
Remove the power connector cable (3).
Reverse this procedure to install the power connector cable.
44
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
