5
Removal and replacement procedures
Tablet component replacement procedures
CAUTION:
Tablet components described in this chapter should only be accessed by an authorized service
provider. Accessing these parts can damage the tablet and void the warranty.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your tablet, go to
, select your country or region, and then
follow the on-screen instructions.
This chapter provides removal and replacement procedures for authorized service provider only parts.
There are as many as 15 screws that must be removed, replaced, and/or loosened when servicing the tablet.
Make special note of each screw size and location during removal and replacement.
Back cover
Description
Spare part number
Back cover
796782-001
7.0 in, HD, LED, TouchScreen, display panel assembly
796784-001
Before disassembling the tablet, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
Remove the back cover:
CAUTION:
Before turning the display panel assembly upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display
panel assembly.
1.
Place the tablet on a flat surface, display panel side down, with the SD card slot and volume control
buttons toward you.
2.
Use the finger notch (1) to release the bottom edge of the back cover (2) from the display panel
assembly.
Tablet component replacement procedures
13
Summary of Contents for Stream 7
Page 4: ...iv Safety warning notice ...
