•
+Configuration
-Critical, Warning, and Configuration events are sent.
•
+Informational
-All events are sent.
4.
In the
Server
field, enter the remote syslog server hostname or IP address.
5.
Configure the
Server Port
.
The default port for the selected protocol will be selected. You can choose one of the default ports or
configure a custom port.
6.
Configure the
Transport Protocol
.
TCP and UDP are supported. The default is TCP.
7.
Click
Submit
.
Configuring event notification parameters
From the
Configuration > Network Management > SMTP
screen, you can enable SMTP (Simple Mail
Transfer Protocol) functionality and configure e-mail notification of library events. The library must have
network access to an SMTP server.
Procedure
1.
Navigate to the
Configuration > Network Management > SMTP
screen.
2.
If SMTP is not enabled, click
SMTP Enabled
.
3.
When enabled, the remaining configurations are active.
4.
Configure SMTP options:
a. Notification Level
— The types of events for which the library should send e-mail
•
Inactive
—No events are sent.
•
Critical
—Only critical events are sent.
•
+ Warnings
—Only critical and warning events are sent.
•
+ Configuration
—Only critical, warning, and configuration events are sent.
•
+ Information
—All events are sent.
b. SMTP Server
—Hostname or IP address of the SMTP server.
c. Security
—Security protocol for accessing the SMTP server.
•
None
•
SSL/TLS
•
STARTTLS
d. SMTP Port
—SMTP server port. The default port for the selected protocol will be selected. You can
choose one of the default ports or configure a custom port.
e. To Email Address
—The address to receive the reported events (for example
[email protected]). Only one email address can be configured.
66
Configuring event notification parameters
