HP StorageWorks Q2300, Installation Manual

Page: 23 / 42

Q2300 PCI-X host bus adapter for Itanium Linux systems installation guide 23
The system prompts:
Do you wish to save your new kernel configuration?
d. Click Yes .
The system saves a new config file in the current directory.
4. At the command prompt, enter the following :
# make dep
5. Locate the source files:
• If you installed the driver RPM, the driver source files reside in
/opt/hp/…
• If you copied your drivers from other media, copy the
qla2x00src-vx.xx.tgz
file to
the
home/qla2x00
directory. For example, if you copied the driver source file on to a
CD-ROM, enter:
# cd /home
# mkdir qla2x00
# cd /home/qla2x00
# cp /mnt/cdrom/qla* .
(The period [.] at the end is required.)
# tar -xvzf qla*.tgz
6. Build the qla2300 driver from the sources:
• For Red Hat EL, enter:
# make SMP=1
• For SUSE SLES, enter:
# make SMP=1 OSVER=linux