Beyond Initial Setup
55
NAS e7000 v2 Quick Start Guide
Configuring Shared Disks
Use Disk Management to configure the quorum and shared disk resources. Verify
that all shared disks are formatted as NTFS and are designated as Basic.
Verifying Disk Access and Functionality
Write a file to each shared disk resource to verify functionality.
At this time, shut down the first node, power on the second node and repeat the
Verifying Disk Access and Functionality step. When it has been verified that both
nodes can read and write from the disks, turn off the second node and power on
the first, and then continue with this guide.
Install Cluster Service Software
Configuring the First Node
Note:
During installation of Cluster service on the first node, the second node must
either be turned off, or stopped prior to the HP StorageWorks NAS server booting. All
shared storage devices should be powered up.
In the first phase of installation, all initial cluster configuration information must
be supplied so that the cluster can be created. This is accomplished using the
Cluster Service Configuration Wizard. All cluster setup and administration
activities must be accessed via the Windows 2000 graphical user interface (GUI)
available through terminal services, the iLO port, or a directly attached keyboard
and mouse connection.
1. Click Start, click Settings, and click Control Panel.
2. Double click Add/Remove Programs.
3. Double click Add/Remove Windows Components.
4. Select Cluster Service. Click Next.
5. When prompted for files on the Windows Powered OS CD or the Windows
2000 SP3 cd, browse to the directory C:\Compaq\Windows
Components\i386.
6. The window shown in
opens. Click I Understand to accept the
condition that Cluster service is supported on hardware from the Hardware
Compatibility List only.
