Figure 49 Identity: Network page
.
You can see, but not modify:
•
MAC Address — a unique identifier for the library controller network interface
•
Full Qualified Domain Name — the fully qualified domain name for the device
•
Clock Synchronization Configuration (SNTP) — When Enabled, the device will obtain the current
time and date from the configured SNTP server.
When IPv4 Addressing is Enabled, you can see, but not modify:
•
IPv4 DNS Server 1 and IPv4 DNS Server 2 — addresses of the configured DNS servers used when
DHCP Addressing is not Enabled.
•
DHCPv4 Addressing — When Enabled, the device will request an IP address from a DHCP server
each time the device is booted.
•
IPv4 Address — the Library network address
•
Subnet Mask — The network mask of the library controller used when DHCP Addressing is not
Enabled.
•
Default Gateway — the gateway used when DHCP Addressing is not Enabled.
When IPv6 Addressing is Enabled, you can see, but not modify:
•
Stateless Addressing — when Enabled, the device will generate an address for itself based on
the routing information obtained from a router advertisement and the MAC address. The device
can manage up to five global addresses at the same time, which can be assigned from different
routers.
•
DHCPv6 Addressing — when Enabled, the Library will request an IP address from a DHCP server
each time the device is booted.
Operating the Tape Library
76
Summary of Contents for StorageWorks MSL2024
