HP StorageWorks MSL2024, User'S And Service Manual

Page: 213 / 276

Configuration change events
Table 54 Configuration change events
Description Configuration event Value
Drive SCSI ID has changed Drive SCSI changed 0x41
Library SCSI ID changed (*) Library SCSI changed 0x42
Drive was enabled Drive enable 0x43
Drive disabled Drive disable 0x44
Drive master assigned Master drive assigned 0x45
Drive sled added Drive sled added 0x46
Drive sled removed Drive sled removed 0x47
Library mode changed (automatic, sequential,
random)
Library mode changed 0x48
Element address changed Element address 0x49
Network parameter has changed Net parameter 0x4A
Slots reserved Slots reserved 0x4B
Mailslot support Mailslot support 0x4C
Admin password has changed Admin password 0x4D
Date and time of RTC set Date/time set 0x4E
Barcode format alignment changed Barcode format 0x4F
Default configuration set Default config set 0x50
Library firmware was upgraded FW upgrade Library 0x51
Drive firmware was upgraded FW upgrade drive 0x52
Auto-cleaning switched on or off Auto-clean feature set 0x53
Drive Fibre Channel parameters changed Drive FC parameters 0x54
A power supply was added to the system Power supply added 0x55
A key server token was removed Key server token was removed 0x56
A key server token was inserted Key server token was inserted 0x57
Encryption has been enabled Encryption has been enabled 0x58
Encryption has been disabled Encryption has been disabled 0x59
The Library Extender has been inserted Extender unit has been inserted 0x60
The Library Extender has been removed Extender unit has been removed 0x61
HP StorageWorks MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and service
guide 213