HP StorageWorks MSL2024, User'S And Service Manual

Page: 201 / 276

1
Gripper: The part of the robotics assembly that pinches media in order to grip it.
2
Slider: The part of the robotics assembly that plunges in and out for get and put operations.
3
Elevator: The part of the robotics assembly that moves in the vertical direction.
4
Rotation: The part of the robotics assembly that turns the robot to face each magazine and the drive.
5
Sled: The part of the robotics assembly that moves the robot towards the OCP or back towards the
drive.
Table 46 Device error sub-codes
Description Error code
Robotic load not reached Cartridge Present sensor 90
No activity after Load command 91
Time-out while loading tape 92
No activity after load command 93
Time-out drive Unload 94
Drive terminated unsuccessfully 95
Tape not ejected at robot unload 96
Slot not free at robot unload 97
Cartridge not seated in load phase 1 98
Table 47 Sub-codes for error B8
Message Sub-code
Library Extender expected 40
Lower Library expected 41
Master Library expected 42
Table 48 Sub-codes for error B9
Message Sub-code
No device present 31
I²C write error 32
HP StorageWorks MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and service
guide 201