HP StorageWorks A7298A, Installation Manual

Page: 77 / 92

Diagnostic and Configuration Utilities
77 Host Bus Adapter for Windows and Linux Installation Guide
Modify Test Options (For lputilnt Only)
Use this option to specify the number of passes on one or more of these tests: PCI
loopback, internal loopback, external Loopback, or all three.
From the LightPulse Utility/NT Main menu screen:
1. Choose Test.
2. Choose the following data for the PCI loopback, Internal loopback, External
Loopback tests:
a. The number of passes. The default is 0x50. 0=infinity
b. The action to take upon encountering errors. Choose one of the following:
— 0 = stop (default)
— 1 = repeat
— 2 = ignore
Reset Host Bus Adapters
Choose this option to reset the HBA. When a reset HBA occurs, the HBA
performs POST testing and reloads functional firmware.
Input/Output
Choose this option to open or close input and output files. The contents of the
Input file are interpreted and executed by the program. The output file contains a
log of all messages. Note that nesting of input files is not supported.
Show Host Bus Adapter Info (For lputilnt Only)
Choose this option to display HBA data in these areas:
■
BIU PCI Configuration Parameters
■
Host Bus Adapter Info and Status
■
Adapter Revisions
■
Display Configuration Data
■
Service Parameters
■
Status/Counters Info
■
Link Status