HP StorageWorks 300, User Manual

Page: 124 / 180

System board LED
and color
Internal Health
LED Color
Status
Red One or more of the following conditions
may exist:
• Processor in socket X has failed.
• Processor in socket X failed over to
the of fl ine spare.
• Processor X is not installed in the
socket.
• Processor X is unsupported.
• ROM detects a failed processor
during POST.
Processor failure,
socket X (Amber)
Amber Processor in socket X is in a pre-failure
condition.
Processor failure,
both sockets (Amber)
Red Processor types are mismatched.
PPM failure (Amber) Red PPM has failed.
DIMM failure, slot X
(Amber)
Red
• DIMM in slot X has failed.
• DIMM in slot X is an unsupported
type, and no valid memory exists in
another bank.
Amber
• DIMM in slot X has reached single-bit
correctable error threshold.
• DIMM in slot X is in a pre-failure
condition.
• DIMM in slot X is an unsupported
type, but valid memory exists in
another bank.
DIMM failure, all
slots in one bank
(Amber)
Red No valid or usable memory is installed
in the system.
Amber The Health Driver has detected a
cautionary temperature level.
Overtemperature
(Amber)
Red The node has detected a hardware
critical temperature level.
Riser interlock
(Amber)
Red The PCI riser board assembly is not
seated.
Online spare
memory (Amber)
Amber Bank X failed over to the online spare
memory bank.
Power converter
module interlock
(Amber)
Red The power converter module is not
seated.
Fan module (Amber) Amber A redundant fan has failed.
Fan module (Red) Red The minimum fan requirements are not
being met in one or more of the fan
modules. One or more fans have failed
or are missing.
Power supply signal
interlock (Amber)
Red The power supply signal cable is not
connected to the system board.
124
Component identi fi cation