HP StorageWorks 2/140 - Director Switch, Service Manual

Page: 26 / 396

General Information
26 Director 2/140 Service Manual
Event Table
The event table displays the last ten events that occurred since the HAFM
application was started. Events that occurred during a prior instance of the
application do not display. If a new event occurs while ten events display, the
oldest event is discarded. A deeper event history is maintained in the form of a log
file viewed through the HAFM application.
The events are internal error conditions detected by the HAFM application, and
are not related to product-specific events reported by a director. Events typically
relate to HAFM audit log and file corruption, invalid product definition and
firmware files, missing product services class, or missing version information.
The event table contains the following columns:
■
Viewed—This column provides a check box associated with each event. Each
check box allows service personnel to mark an event as viewed
(acknowledged with appropriate action taken).
■
Date/Time—The date and time the event was reported to the HAFM
appliance.
■
Product—The product associated with the event. Some events are associated
with the HAFM application, while others are associated with a specific
instance of the Element Manager. In the latter case, the product (Director
2/140) and configured name (or IP address) associated with the instance are
displayed.
■
Event—The numeric event code and a brief description of the event.
Status Line
The status line provides a status indicator and message area. HAFM status
symbols are explained in
Table 2 .
The HAFM application icon (upper left corner of the window) is dynamic and
matches the status indicator. This feature allows users and service personnel to
observe the status when the application is minimized to the Windows 2000 task
bar.
The message area briefly displays messages during HAFM application startup to
indicate the progress of startup activities.