HP StorageWorks 1/16 Tape SuperLoader, Manual, Page: 82 / 146

SuperLoader Operation
68 1/16 Tape SuperLoader Reference Guide
6. Press Enter.
A list of messages similar to the following screen appears.
Figure 59: SuperLoader version messages
View Element Status
The element status reports the status of the magazine slots. The status indicates
whether a slot contains a cartridge, and which slot is allocated as the cleaning
cartridge’s slot.
To view an element’s status:
1. On the main menu, scroll to Status. (See Figure 55.)
2. Press Enter.
3. On the Status submenu, scroll to SuperLoader Info. (See Figure 56.)
4. Press Enter.
Table 5: SuperLoader Version Messages
Firmware The number indicates the firmware version.
EDC The number indicates the Error Detection Code that
was generated when the firmware was installed. The
SuperLoader uses this number to verify that the
firmware and the memory holding the firmware are
good.
HW Rev The number indicates the hardware version.
ME Rev The number indicates the mechanical version.
Firmware: V7.0
EDC: 575A49B8
HW + ME Rev: 1 1