HP Sprout Pro, Maintenance & Service Manual, Page: 72 / 136

Power supply (in column)
The power supply is located toward the bottom of the column below the projector.
To remove the power supply:
1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 23 ).
2. Remove the rear covers (see Removing the rear covers from the computer on page 24 ).
3. Remove the memory cover (see Memory on page 29 ).
4. Separate the computer from the column (see Separating the computer from the column on page 41 ).
5. Position the column so you can access the screws on the bottom.
62 Chapter 4 Removal and Replacement Procedures