HP Spectre x2, Maintenance And Service Manual

Page: 41 / 85

Fan
Description Spare part number
Fan (includes cable) 924174-001
Before removing the fan, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see Display panel assembly on page 20 ).
5. Remove the bottom bezel (see Bottom bezel on page 24 ).
6. Remove the battery (see Battery on page 25 ).
Remove the fan:
1. Disconnect the fan cable (1) from the system board.
2. Remove the three Phillips PM2.0×2.8 screws (2) that secure the fan to the back cover.
3. Remove the fan (3).
Reverse this procedure to install the fan.
Component replacement procedures 31