manualshive.com logo in svg

HP Spectre x2, Maintenance And Service Manual, Page: 33 / 85

Share
Download
HP Spectre x2 Maintenance And Service Manual Download Page 33

12.

Remove the display panel assembly (5).

Reverse this procedure to install the display panel assembly.

Touchscreen board

Description

Spare part number

Touchscreen board

NOTE:

The Touchscreen board spare part kit does not include the Touchscreen board cable. The 

Touchscreen board cable is available using spare part number 924172-001.

924179-001

Before removing the Touchscreen board, follow these steps:

1.

Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, 
and then shut it down through the operating system.

2.

Disconnect all external devices connected to the tablet.

3.

Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then 
unplugging the AC adapter from the tablet.

4.

Remove the display panel assembly (see 

Display panel assembly on page 20

).

Remove the Touchscreen board:

1.

Detach the two pieces of grounding tape that secure the Touchscreen board (1) to the display 
panel assembly.

2.

Release the two ZIF connectors (2) to which the Touchscreen board cables are connected, and then 
disconnect the Touchscreen board cables from the display panel assembly.

Component replacement procedures

23

Summary of Contents for Spectre x2






















































































Reviews:

No comments