manualshive.com logo in svg

HP Spectre Folio, Maintenance And Service Manual, Page: 59 / 90

Share
Download
HP Spectre Folio Maintenance And Service Manual Download Page 59

Lower frame

Description

Spare part number

Lower frame (includes retention band with adhesive and magnets)

L43335-001

Before removing the lower frame, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then 
unplugging the AC adapter from the computer.

4.

Remove the display panel (see 

Display panel on page 25

), and then remove the following components:

a.

Webcam (see 

Webcam on page 36

)

b.

Leather cover (see 

Leather cover on page 41

)

c.

Speaker assembly (see 

Speaker assembly on page 46

)

d.

Keyboard (see 

Keyboard on page 49

)

Remove the lower frame:

1.

Swing the bottom edge (1) of the lower frame up and forward until it disengages from the display 
back cover.

2.

Detach the left and right edges of the retention band (2) that secures the lower frame to the display back 
cover. (The retention band is attached to the lower frame with adhesive.)

3.

Remove the lower frame (3).

Component replacement procedures

51

Summary of Contents for Spectre Folio



























































































Reviews:

No comments