manualshive.com logo in svg

HP Spectre Folio, Maintenance And Service Manual, Page: 46 / 90

Share
Download
HP Spectre Folio Maintenance And Service Manual Download Page 46

WWAN antenna

Description

Spare part number

WWAN Antenna Kit (includes left and right WWAN antenna cables and transceivers)

L38671-001

Before removing the WWAN antenna, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then 
unplugging the AC adapter from the computer.

4.

Remove the display panel (see 

Display panel on page 25

).

5.

Remove the webcam (see 

Webcam on page 36

).

Remove the WWAN antenna:

1.

Release the left WWAN antenna cable from the retention clips (1) built into the display back cover.

2.

Release the right WWAN antenna cable from the retention clips (2) built into the display back cover.

3.

Remove the four Phillips M2.5×2.3 broad head screws (1) that secure display back cover to 
the leather cover.

38

Chapter 5   Removal and replacement procedures

Summary of Contents for Spectre Folio



























































































Reviews:

No comments