HP Spectre 13-v100 Maintenance And Service Manual Download

Page: 8 / 61

Category

Description

Audio (continued)

Quad speakers

Supports Smart Amp functionality

Wireless

Integrated Wireless options with dual antennas (LGA/PCIe 1216)

Support for the following WLAN module:

Intel Dual band wireless-AC 8260 802.11ac 2x2 WiFi + BT 4.2 Combo Adaptor (non-vPro)

Intel WiDi support

Compatible with Miracast-certified devices

Internal card expansion

One M.2 slot for solid-state drive

Ports

Hot plug/unplug and auto detect for correct output to wide-aspect vs. standard aspect video (auto
adjust panel resolution to fit embedded panel and external monitor connected)

Headphone/microphone combo

USB Type-C ports on unit:

●

(2) USB 3.1 Gen 2 with Thunderbolt™ Gen 3 technology - rear, middle

●

(1) USB 3.1 Gen 1 (i.e. USB 3.0) - rear

●

Intel Alpine Ridge DP design

●

All ports support data transfer, power delivery, Display Port 1.2 out up to 4096×2304 (60Hz)
and HDMI 1.4 out through dongle

●

All ports support USB Boost

Keyboard/pointing devices

Full-size, backlit, island-style keyboard

TouchPad requirements:

●

Image sensor ClickPad with glass surface

●

MultiTouch gestures enabled

●

Support for modern TrackPad gestures

●

Taps enabled as default

Power requirements

AC adapter

Support for 45-W USB Type-C straight type adapter

Duck head power cord

1.8-meter (6-foot) power cord

Battery

Support for 4-cell, 38-Wh, 4.95-Ah, li-ion battery

Security

Support for Trusted Platfom Module (TPM) 2.0

Operating system

Preinstalled: Windows 10 and Windows 10 Professional

For Developed Market (ML): Windows 10 Home High End ML

For Emerging Market (EM/SL):

●

Windows 10 Home High End EM/SL

●

CPPP Windows 10 Home China Language Edition

Chapter 1 Product description

Summary of Contents for Spectre 13-v100






























































Search results

Summary of Contents for Spectre 13-v100

Reviews:

Related manuals for Spectre 13-v100

Brands by name

Popular brands

HP Spectre 13-v100, Maintenance And Service Manual

Search results

Summary of Contents for Spectre 13-v100

Reviews:

Related manuals for Spectre 13-v100

Brands by name

Popular brands