manualshive.com logo in svg

HP SlateBook PC, Maintenance And Service Manual

Share
Download
HP SlateBook PC Maintenance And Service Manual Download Page 23

Keyboard/top cover

NOTE:

The keyboard/top cover spare part kit includes the keyboard cable.

For use in country or region

Spare part number

For use in country or region

Spare part number

In neon pink finish:

For use in Latin America

761505-161

For use in Belgium

761505-A41

For use in the Netherlands

761505-B31

For use in Canada

761505-DB1

For use in Spain

761505-071

For use in Denmark, Finland,
and Norway

761505-DH1

For use in Switzerland

761505-BG1

For use in France

761505-051

For use in the United Kingdom
and Singapore

761505-031

For use in Italy

761505-061

For use in the United States

761505-001

In sweet yellow finish:

For use in Latin America

759930-161

For use in Belgium

759930-A41

For use in the Netherlands

759930-B31

For use in Canada

759930-DB1

For use in Spain

759930-071

For use in Denmark, Finland,
and Norway

759930-DH1

For use in Switzerland

759930-BG1

For use in France

759930-051

For use in the United Kingdom
and Singapore

759930-031

For use in Italy

759930-061

For use in the United States

759930-001

Before replacing the keyboard/top cover, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

NOTE:

When replacing the keyboard/top cover, be sure that the TouchPad (see 

TouchPad

on page 21

) and power button board (see 

Power button board on page 22

) are removed from the

defective keyboard/top cover and installed on the replacement keyboard/top cover.

Remove the keyboard/top cover:

1.

Close the computer.

2.

Turn the computer upside down with the front toward you.

3.

Remove the rear rubber feet 

(1)

.

4.

Remove the oblong rubber screw covers 

(2)

.

Keyboard/top cover

17

Summary of Contents for SlateBook PC























































Reviews:

No comments

Brands by name

Popular brands

Load more brands