HP ProLiant SL4545 G7, Maintenance And Service Manual

Page: 38 / 61

Removal and replacement procedures 38
6.
Disconnect all cables connected to the underside of the personality board assembly.
7.
Remove the personality board assembly.
To replace the component, reverse the removal procedure.
System board
To remove the system board:
1.
Power down the node (on page 21 ).
2.
Remove the node from the chassis (" Remove a node from the chassis " on page 22 ).
3.
Remove the access panel (on page 23 ).
4.
Remove the processor air baffle (" Processor air baffle " on page 28 ).
5.
Remove all DIMMs (" DIMMs " on page 27 ).