HP ProLiant SL390s G7 2U, Maintenance And Service Manual

Page: 33 / 91

Removal and replacement procedures 33
To install the system tray:
1. Install the system tray into the chassis and push it until it stops.
2. Press the latch to secure the system tray to the chassis.
Figure 3 Installing the left server
Figure 4 Installing the right server
Cable management
Always follow good cable management practices when working inside the computer.
•
Keep cables away from major heat sources like the heatsink.
•
Do not jam cables on top of expansion cards or memory modules. Printed circuit cards are not
designed to withstand excessive pressure.
•
Keep cables clear of sliding or moveable parts to prevent cutting or crimping.
•
When folding a flat ribbon cable, never fold to a sharp crease. Sharp creases may damage the
wires.
•
Some flat ribbon cables come pre-folded. Never change the folds on these cables.