HP ProLiant SL250s Gen8, User Manual, Page: 23 / 119

Operations 23
Installing the SFF hot-plug drive cage
1.
Install the SFF hot-plug drive cage.
2.
Connect the power and Mini-SAS cables to the drive backplane.
3.
Install the server into the chassis (" Installing the server into the chassis " on page 31 ).
4.
Connect all peripheral cables to the server.
5.
Power up the server.
Remove the PCI riser cage
1.
Power down the server (on page 16 ).
2.
Disconnect all peripheral cables from the server.
3.
Remove the server from the chassis (on page 16 ).
4.
Remove the SFF hot-plug drive cage (" Removing the SFF hot-plug drive cage " on page 22 ).
5.
Remove the front GPU cage (on page 17 ).
6.
Remove the interposer board (on page 18 ).
7.
Remove the front GPU bracket (on page 19 ).
8.
Remove the PCI riser cage:
a.
Loosen the thumbscrew securing the PCI riser, and then remove the screws securing the PCI riser
cage.