HP ProLiant SL250s Gen8 User Manual Download Page 14

Page: 14 / 119

Component identification 14

•

Rear SFF drive bay numbers (box 0)

Hot-plug drive LED definitions

Item LED

Status

Definition

Locate

Solid blue

The drive is being identified by a host application.

Flashing blue

The drive carrier firmware is being updated or requires an update.

Activity ring

Rotating green

Drive activity

Off

No drive activity

Do not remove

Solid white

Do not remove the drive. Removing the drive causes one or more of

the logical drives to fail.

Off

Removing the drive does not cause a logical drive to fail.

Drive status

Solid green

The drive is a member of one or more logical drives.

Flashing green

The drive is rebuilding or performing a RAID migration, strip size

migration, capacity expansion, or logical drive extension, or is
erasing.

Flashing

amber/green

The drive is a member of one or more logical drives and predicts

the drive will fail.

Flashing amber The drive is not configured and predicts the drive will fail.

Solid amber

The drive has failed.

Summary of Contents for ProLiant SL250s Gen8
























































































































Search results

Summary of Contents for ProLiant SL250s Gen8

Reviews:

Related manuals for ProLiant SL250s Gen8

Brands by name

Popular brands

HP ProLiant SL250s Gen8, User Manual

Search results

Summary of Contents for ProLiant SL250s Gen8

Reviews:

Related manuals for ProLiant SL250s Gen8

Brands by name

Popular brands