HP ProLiant SL250s Gen8, Maintenance And Service Manual, Page: 42 / 88

Removal and replacement procedures 42
5.
Remove the interposer board from the metal bracket.
To replace the component, reverse the removal procedure.
FlexibleLOM riser board
To remove the component:
1.
Power down the server (on page 24 ).
2.
Disconnect all peripheral cables from the server.
3.
Remove the server from the chassis (on page 24 ).
4.
Remove the SFF hot-plug drive cage (on page 25 ).
5.
Remove the front GPU cage (on page 26 ).
6.
Remove the interposer board assembly (on page 26 ).
7.
Remove the front GPU bracket (on page 27 ).