HP ProLiant SL250s Gen8, Maintenance And Service Manual

Page: 35 / 88

Removal and replacement procedures 35
8.
Remove the rear GPU riser board.
To replace the component, reverse the removal procedure.
x32 riser board
To remove the component:
1.
Power down the server (on page 24 ).
2.
Disconnect all peripheral cables from the server.
3.
Remove the server from the chassis (on page 24 ).
4.
Remove the interposer board assembly (on page 26 ).
5.
Remove the x32 riser board from the interposer board.
To replace the component, reverse the removal procedure.