HP ProLiant SL250s Gen8, Maintenance And Service Manual, Page: 33 / 88

Removal and replacement procedures 33
•
Front GPU
•
Rear GPU
To replace the component, reverse the removal procedure.
Level 2 power board
To remove the component:
1.
Power down the server (on page 24 ).
2.
Disconnect all peripheral cables from the server.
3.
Remove the server from the chassis (on page 24 ).
4.
If removing from the left node, remove the interposer board (" Remove the interposer board assembly "
on page 26 ).
5.
Disconnect both GPU power cables from the level 2 power board.