HP ProLiant ML310 G3 1TB Administration Manual Download Page 15

Page: 15 / 63

W A N

End u s e r

r e s t o r e

Sn a p s h o t image

o f f ile s e r v e r s

MSA Arrays

(provided with some DP Storage Servers)

DP Storage

Server

To tape

File

servers

10692a

Figure 2 Centralized branch of

ce environment

DPM end-user recovery option

The DPM end-user recovery feature allows end users to independently recover data by retrieving shadow

copies of

les. To use this feature, you must enable it on your Data Protection Storage Server and on

the end-user client PC. For detailed instructions on enabling the end-user recovery function, please

see Microsoft DPM help.

Supporting Single Instance Storage on protected

le servers

This section only applies if one or more of your protected

le servers are running Single Instance Storage

(SIS) on a volume protected by DPM. By default ,DPM does not support SIS on a protected volume, but

hot

xes are provided in the

c:\hpnas\components\DPM\SIS-QFE

folder that can be applied.

SIS works by searching a hard disk volume to identify duplicate

les. If SIS

nds identical

les, it saves

one copy of the

le to a central repository, called the SIS Common Store, and replaces other copies

with pointers to the stored versions. If SIS linked

les are backed up by DPM, the link information is not

restored properly when the

les are restored. To resolve this problem follow the procedure below.

Install the provided

DataProtectionManager2006-KB917642.exe

on the Data Protection

Storage Server. This hot

x cannot be applied until the DPM mini-setup has been performed. DPM

mini-setup is discussed in your Data Protection Storage Server installation guide.

Go to the Management/Agents tab of the DPM user interface. Update the agent on the protected

le server that uses SIS.

Install the provided

WindowsServer2003-KB913109.exe

hot

x on both the Data Protection

Storage Server and the protected server.

Go to the Protection tab on the DPM user interface and run a synchronization with consistency check

on the protected volumes.

HP ProLiant ML310 G3 Data Protection Storage Server

Summary of Contents for ProLiant ML310 G3 1TB
































































Search results

Summary of Contents for ProLiant ML310 G3 1TB

Reviews:

Related manuals for ProLiant ML310 G3 1TB

Brands by name

Popular brands

HP ProLiant ML310 G3 1TB, Administration Manual

Search results

Summary of Contents for ProLiant ML310 G3 1TB

Reviews:

Related manuals for ProLiant ML310 G3 1TB

Brands by name

Popular brands